Sonora Communications, Inc.

Though we have used various models of Actiontec DSL access routers, these simple instructions for the GT701 will probably suffice.

Notes

• do not install any software on your PC - it's not necessary
• easy web browser management
• the default IP address is 192.168.0.1
• the default username is 'admin'
• the default password is blank
• the DHCP server function is turned on by default
• Actiontec FAQ
• Qwest FAQ

To Restore Factory Defaults

• only needed if you can't access the HTML management pages
• press and hold the reset button for ten seconds until the power light turns an “amber” color
• after the “amber” light appears, release the reset button to reboot
• if your PC is configured for DHCP (auto), reboot your PC to renew your DHCP lease
  • most PCs are configured for DHCP

Configure an Actiontec DSL Router for Use with Sonora Comm ADSL Internet Access Service

• open a web browser and browse to the IP of the router
  • http://192.168.0.1 is the factory default
    • try http://192.168.1.1 if that doesn't work
    • or reset the router to factory defaults and then reboot your PC
  • choose Setup / Configuration
  • choose Begin Basic Setup
  • choose PPPoA
    • for static IP accounts, use your assigned credentials
    • for dynamic IP accounts, use 'opusone' and 'dsl'
  • Before you save and restart
    • choose Utilities
    • choose DSL Settings
      • make sure VPI is set to 0
      • make sure VCI is set to 32
  • Save and Restart